Wenzhou Xubian Electric Co., Ltd. is a technology-driven China Power Distribution Equipment Manufacturer and Custom Switchgear and Transformers Supplier, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.
We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.
Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.
Wenzhou Xubian Electric Co., Ltd. builds complete power distribution equipment for medium- and low-voltage networks: metal-enclosed switchgear from 12 kV to 40.5 kV, ring main units, prefabricated and underground box substations, distribution transformers, vacuum circuit breakers, load and isolating switches, and the accessory sets used inside gas-insulated cabinets. As a Power Distribution Equipment Manufacturer, we work from the project single-line diagram, the local grid standard and the installation environment, so a substation, industrial plant or photovoltaic park receives one coordinated equipment set instead of mismatched components. Production runs from our factory in Liushi Town, Yueqing, Wenzhou, Zhejiang.
Range in brief: 12–40.5 kV switchgear and circuit breakers · 12/0.4 kV box substations · 10 kV class distribution transformers · 0.4 kV distribution and power-quality assemblies · OEM/ODM configuration · factory test reports issued with each shipment.
The ten product families below are manufactured and supplied as stand-alone units or as a matched distribution package, sharing consistent ratings, terminal arrangements and documentation.
Armoured withdrawable and fixed AC metal-enclosed switchgear for 12 kV to 40.5 kV, including KYN61-40.5(Z), KYN28-12(Z), KYN28A-24 and XBXGN-40.5, fitted with vacuum circuit breakers, isolators, earthing switches and protection relays. Explore the switchgear range.
Fully insulated and fully sealed, solid-insulated and air-insulated ring main units and compact switchgear, including XBSRM-12, XBGN-12, HXGN-12 and box-type fixed or withdrawable designs for tight distribution rooms.
European and American style pre-installed substations, YBD1-12/0.4 underground substations, PV-dedicated units, cable branch boxes and outdoor ring network cabinets, wired and tested before shipment. View box-type substation configurations.
Draw-out and fixed low-voltage switchgear, capacitor compensation and APF active filter cabinets, comprehensive distribution cabinets and AC distribution boxes built to GB/T 7251.
Fully sealed oil-immersed distribution transformers such as S11-10kV, with in-house winding, core assembly, oil filling and routine electrical checks. Review the transformer series.
Indoor ZN63(VS1)-12 vacuum breakers, outdoor ZW32-40.5 vacuum and SF6 breakers, plus FKV and FKSIS embedded-pole breakers for inflatable cabinet installation.
FZW28-12F outdoor vacuum load switches and indoor or outdoor isolating switches for sectionalising duty and visible isolation points.
FK-12 CF-type spring operating mechanisms, embedded poles, bushings and service parts that keep gas-insulated cabinets maintainable.
| Product family | Voltage / rating focus | Configuration focus | Typical installation |
|---|---|---|---|
| HV complete switchgear | 12 kV, 24 kV, 40.5 kV | Armoured withdrawable or fixed, breaker type, busbar and cable compartment layout | Indoor substations, plant main distribution |
| 12 kV medium voltage switchgear | 12 kV ring and compact designs | Fully sealed, solid-insulated or air-insulated; ring, tee-off and riser circuits | Urban distribution rooms, renewable connection points |
| Box-type substation | 12/0.4 kV pre-installed | European or American layout, underground or pad-mounted, PV variant, enclosure protection | Outdoor municipal, park, community and PV sites |
| Low voltage assemblies | 0.4 kV distribution and compensation | Outgoing circuit count, metering, capacitor or active filter modules | Plant floors, commercial buildings, end distribution |
| Transformer series | 10 kV class distribution transformers | Sealed oil-immersed construction, capacity, impedance, tapping range | Substation and box substation cores |
| Circuit breakers | 12 kV to 40.5 kV, up to 630 A and 25 kA on selected models | Fixed or handcart, indoor or outdoor, vacuum or SF6, spring operating mechanism | Switchgear bays, pole-mounted and outdoor switching |
| Load, isolating switches and cabinet accessories | 12 kV and 40.5 kV duty | Manual or motorised operation, interlock arrangement, replacement mechanisms and poles | Ring network points, isolation and cabinet servicing |
Configuration starts from the electrical duty and works outward to the enclosure, control scheme and shipment split. Each choice is fixed in the technical agreement before production.
Electrical configuration
Mechanical and environmental configuration
Enclosures are formed and powder-coated in-house; current paths use copper busbars with defined clearances and supported insulators. Interruption is handled by vacuum interrupters in the breaker families, with SF6 applied in sealed outdoor breaker designs and solid epoxy insulation used in compact and ring main equipment.
Incoming materials and purchased components are inspected on arrival, and QC staff patrol winding, cabinet processing, assembly and wiring before semi-finished units are released to the next stage. Completed equipment passes function and electrical verification before packing, and test records travel with the shipment.
Pre-installed substations leave the factory with internal connections completed and tested, which reduces site work to foundation checks, cable termination, earthing and commissioning tests. For key-project equipment we provide on-site unpacking, installation and commissioning guidance, supported by English-language online technical response.
We operate as a China Power Distribution Equipment Supplier for importers, distributors and engineering contractors, with export documents, packing lists and loading information prepared for each shipment. Custom work covers voltage class, cabinet structure, component configuration, private-label nameplates, manuals and packaging, confirmed through drawings and a technical agreement before production.
For distributors, we support recurring wholesale switchgear and transformer supply with consistent nameplates, documentation and packing formats across repeat orders. Standard models are typically scheduled within 7–15 working days; OEM and ODM equipment is scheduled after drawing approval and production planning.
Yes. We manufacture the medium-voltage switchgear, box substation, distribution transformer and low-voltage assemblies as one coordinated set, with ratings, terminal arrangements and documentation aligned across the package.
We do. Custom work covers electrical parameters, cabinet structure, component selection, branding, manuals and packaging. Non-standard designs follow drawing confirmation, prototype testing where required, and then mass production.
Shipments include factory test reports, structural and circuit drawings, operation and maintenance manuals, packing lists and export documents. Additional certification support is assessed against the destination market at the enquiry stage.
Standard models are usually scheduled within 7–15 working days. OEM and ODM equipment depends on the drawings and production plan, and the confirmed delivery date is stated in the quotation after the technical solution is agreed.
For key-project equipment we provide on-site unpacking, installation and commissioning guidance, together with online technical support for troubleshooting. Pre-installed substations arrive internally wired and tested to shorten site work.
Equipment carries a 12-month repair, replacement and return warranty. Spare breakers, mechanisms, embedded poles, bushings and cabinet accessories remain available after the warranty period, and quality enquiries receive a technical response within 2 hours.