Industry News

Home / News / Industry News / How to Choose High Voltage Switchgear: Withdrawable, Fixed and Mining Substation Options
Wenzhou Xubian Electric Co., Ltd.
2026-11-11

How to Choose High Voltage Switchgear: Withdrawable, Fixed and Mining Substation Options

Direct answer
Choose withdrawable switchgear when you need fast circuit restoration and a spare breaker truck, choose fixed switchgear when the layout is a simple single-busbar substation, and choose sealed inflatable units when space or humidity rules out open-air insulation. For mines and heavy industry, specify the higher short-circuit ratings, interlocks and anti-condensation heating. A China High Voltage Switchgear Manufacturer such as Wenzhou Xubian Electric Co., Ltd. can build each of these formats from 12 kV to 40.5 kV.
12 to 40.5 kVRated voltage range
630 to 3150 AKYN28 series current range
16 to 50 kAShort-time withstand, 4 seconds
7 to 15 daysStandard model scheduling

How to Choose High Voltage Switchgear for a Substation

Most selection errors come from starting with a model name instead of the network. The cabinet must carry the normal current, survive the worst fault and fit the room. Four rules keep the choice grounded.

Rule 1Fix the voltage class first. Cabinets are built for 3.6, 7.2 and 12 kV, for 24 kV, and for 40.5 kV. A 24 kV cabinet such as KYN28A-24 carries a 60 kV one-minute withstand level and a 125 kV lightning impulse level.
Rule 2Size current and fault duty together. KYN28-12(Z) is offered from 630 A to 3150 A with short-time withstand current of 16 kA to 50 kA for 4 seconds. Choose the fault rating from the study, not from the load alone.
Rule 3Match the room and environment. Standard conditions are altitude up to 1000 m, daily average humidity up to 95 percent and seismic intensity up to 8 degrees. Anything outside these values is agreed at the order stage.
Rule 4Lock protection, control and documents. Relays, CT and VT ratios, the DC control supply and the standard set belong in the technical agreement before production starts.
Good practice: Send the single-line diagram, short-circuit level and room dimensions together. Our engineers then confirm cabinet width, cable entry and aisle space in one review instead of several.

Withdrawable or Fixed High Voltage Switchgear: Which Is Better

Neither format wins everywhere. Withdrawable switchgear separates the breaker truck from the cabinet, so a faulty breaker is replaced by a spare in minutes. Fixed switchgear keeps the breaker in place, which gives a simpler structure for single-busbar and bypass arrangements.

Withdrawable KYN28-12(Z) and KYN61-40.5(Z) Four compartments, shutters and a removable truck IP4X at 12 kV and IP3X at 40.5 kV Best for main boards and frequent operation
VS
Fixed XBXGN-40.5 Single busbar or single busbar with bypass IP2X enclosure, maintenance-free vacuum interrupter Best for simple substations and in-place inspection
Parameter KYN28-12(Z) KYN61-40.5(Z) XBXGN-40.5
Rated voltage 3.6 / 7.2 / 12 kV 40.5 kV 40.5 kV
Rated current 630 to 3150 A 1250 / 1600 / 2000 A 1600 A
Short-time withstand (4 s) 16 to 50 kA 20 / 25 / 31.5 kA 25 kA
Protection class IP4X IP3X IP2X
Cabinet size Height 2300 mm, width 800 or 1000 mm Height 2650 mm, width 1400 mm 1818 or 2000 x 3000 x 3300 mm
Breaker mechanical life Per project scheme 10000 operations 6000 operations

High Voltage Switchgear Product Series

Explore our high-voltage complete switchgear, from 12 kV withdrawable cabinets to 40.5 kV fixed units and sealed ring network equipment. Swipe or use the arrows, then open any card for full parameters and drawings.

Air-Insulated or Sealed Inflatable Switchgear: Which Fits the Room

Air-insulated metal-clad cabinets are the standard answer for dry, clean indoor rooms. KYN28A-24, for instance, is a 24 kV armoured withdrawable cabinet that measures 800 x 1810 x 2380 mm and weighs 840 to 1440 kg, with a breaker mechanical life of 20000 operations and an energy storage time of 10 seconds or less.

Sealed inflatable equipment solves a different problem. SRM-12 is fully sealed and fully insulated, so its performance is not affected by environment and climate. It is built from load switch units, load switch fuse combinations, vacuum breaker units and bus units, and it needs no maintenance in normal service. That makes it a strong choice for compact rooms, humid sites and outdoor ring network points.

Pick air-insulated whenthe room is dry and has enough floor area, you want a spare breaker truck, and the fault level is high.
Pick sealed inflatable whenspace is tight, humidity or pollution is a concern, or the unit sits at an outdoor ring network node.

Which High Voltage Switchgear Suits Mining Substations

Mining is one of the hardest duties for a distribution room. A reliable China Switchgear for Mining Substation Manufacturer must answer three problems at once: heavy starting current, dust and moisture, and the cost of an unplanned stoppage.

Loads that stress the cabinet

Crushers, mills, ventilation fans and hoists draw large starting current and trip on faults more often than office loads do. These feeders belong on withdrawable cabinets with the higher short-circuit ratings in the range, so a damaged breaker is swapped for a spare truck and the shaft returns to service quickly.

Environment and safety

Dust, damp and wide temperature swings call for anti-condensation heating, shutters and agreed enclosure grades. KYN28-12 supports environmental codes for humid and hot climates, dry and hot climates, and high altitude. Interlocks prevent moving the truck under load, closing the breaker with the earthing switch in the wrong position, closing the earthing switch on a live circuit and entering a live compartment.

Check before ordering: Standard design covers altitude up to 1000 m. Mines at higher altitude, or with corrosive gas, severe vibration or conductive dust, need a documented agreement with our engineers before the design is released.
Main incomerKYN61-40.5(Z) at 1250 to 2000 A for 40.5 kV supply, built for frequent operation.
Process feedersKYN28-12(Z) at up to 3150 A and 50 kA for crushers, mills and fans.
Remote ring nodesSRM-12 sealed units where dust and damp rule out open insulation.
Control powerXBGZDW DC screens and reactive power compensation supplied with the same order.

How to Buy OEM and ODM High Voltage Switchgear from China

Supplier or manufacturer: what to verify

A China High Voltage Switchgear Supplier is useful only when it controls production. Wenzhou Xubian Electric Co., Ltd. runs sheet-metal processing, busbar fabrication, wiring, assembly and testing in its own workshop in Liushi Town, Yueqing, Zhejiang, so the cabinet that ships is the cabinet that was tested.

OEM, ODM and custom explained

An OEM High Voltage Switchgear Supplier builds to your drawings and puts your nameplate, manual and packaging on the equipment. An ODM High Voltage Switchgear Manufacturer starts from its own proven design and adapts voltage class, structure and components to your grid. A Custom High Voltage Switchgear Supplier covers everything outside the standard list, such as cable entry direction, protection scheme and control mode, whether manual, electric or intelligent remote.

From enquiry to shipment

  1. Technical review. Drawings, ratings and site data are checked against the standard set.
  2. Agreement and drawings. Scope, nameplate and documents are fixed before production.
  3. Prototype where needed. Non-standard designs are tested for insulation and voltage withstand first.
  4. Production and inspection. Incoming parts are inspected, then QC patrols cover assembly and wiring.
  5. Factory acceptance. Voltage withstand, temperature rise and functional checks end in a test report.
  6. Shipment and support. Drawings, manuals and export documents travel with the equipment, backed by a 12-month warranty.
Lead time: Standard models are scheduled at 7 to 15 working days. OEM and ODM cabinets are scheduled after drawings and specifications are confirmed.

Information to prepare

Prepare the single-line diagram, system voltage, busbar arrangement, short-circuit level, feeder currents, cable or overhead entry, protection and metering scheme, control mode, site altitude and humidity, room dimensions, destination standard and nameplate language. With this list ready, the first technical reply is faster and the drawing round is shorter.

Planning a 12 kV to 40.5 kV distribution room Send your single-line diagram to our engineers, or view the complete switchgear range and the contact page.


Interested in cooperation or have questions?
  • Read More