GN27-40.5 indoor high-voltage disconnector is a new type of product. It is used in power systems with a rated voltage of 40.5kV and AC 50Hz, for making and breaking circuits under live voltage without load conditions. It is a replacement product designed and produced to replace old products. It can be used in conjunction with high-voltage switchgear or used alone. Equipped with a CS6-2 operating mechanism. All adopt a reinforced insulation design, which can meet the requirements of Class II pollution areas. Scientific and reasonable design, novel structure; multiple contacts, rotary contact, good self-cleaning ability, improved heat dissipation; contacts are within two surfaces, small operating force, large contact pressure, easy to adjust; adopts large creepage distance, insulation capacity and withstand voltage all meet the highest requirements; bearings are added on the rotating shaft, service life is improved, and operation is light.
This series of disconnectors is of vertical rotating knife-gate type three-phase common base structure. The contacts on the side of the fracture are designed as swinging multi-contact contacts, featuring single contact pressure, low wear, large heat dissipation area, and small operating torque. At the same time, large creepage distance post insulators and pull-rod insulators are adopted, featuring high insulation performance and high mechanical strength.
To meet requirements, types such as bottle-mounted type, through-wall type, and earthing-blade type are designed. This series of disconnectors can be installed horizontally, vertically, or at an incline.
en
English
русский
Español
عربى
Français
Português 



















