GN19-12 indoor high-voltage disconnector is high-voltage switchgear used in power systems with a rated voltage of 12kV and AC 50Hz and below, equipped with a CS6-1 type manual operating mechanism, used for making and breaking circuits under live voltage without load conditions. There are also derived products such as anti-pollution type, high-altitude type, and those with live display devices.
This series of disconnectors is equipped with a CS6-1 type manual operating mechanism (the disconnector with panel is equipped with a self-contained interlocking operating mechanism).
This series of disconnectors is of three-pole structure, composed of base frame, rotating shaft, pull rod, porcelain post insulator, blade and wiring board. The rotating shaft is installed on the base frame, with three pairs of pull rods welded on it. The pull rods are connected to the blades through pull-rod porcelain insulators. The rotating shaft extends out of the frame, and any section of it can be connected to the operating mechanism.
Type C is athrough-wall type. Among them, C1 indicates that the rotation is on the through-wall side; C2 indicates that the breaking is on the through-wall side; C3 indicates that both sides are on the through-wall side.
en
English
русский
Español
عربى
Français
Português 

















