XBGZDW Intelligent high frequency DC screen Custom

Home / Products / High-Voltage Complete Switchgear / XBGZDW Intelligent high frequency DC screen
Wenzhou Xubian Electric Co., Ltd.
  • XBGZDW Intelligent high frequency DC screen
  • XBGZDW Intelligent high frequency DC screen
  • XBGZDW Intelligent high frequency DC screen
  • XBGZDW Intelligent high frequency DC screen
ccdwwvlu1792743489 Model Designation
XB Enterprise code
GZD Power system designation
W Microcomputer control
□ (1st) Type number
□ (2nd)  Number of battery groups
□ (3rd) Battery capacity
□ (4th) DC output voltage class
  • Microcomputer-controlled dual-channel AC input with automatic switchover.
  • AC input overvoltage, undervoltage, and phase-loss automatic detection, with display and alarm protection.
  • The charging and float-charging modules use intelligent high-frequency switching rectifier modules, with N+1 redundancy, automatic load sharing, and hot-swap capability.
  • The battery is automatically switched between charging and float-charging processes, and can run normally according to computer settings. The system can decouple from the grid or restore grid power via program-controlled procedures to achieve intelligent equalized float charging of the battery bank.
  • If a fault or erroneous control command occurs in the microcomputer control device, the charging module enters an autonomous working state, with output voltage held at the factory-set safe voltage, ensuring system reliability.
  • The intelligent monitoring system provides detailed environmental monitoring communication protocols for the AC input, DC output, and battery loop, as well as any expanded monitoring, and has an intelligent interface for communication with the substation's integrated automation system.
Item Functional Parameters
Voltage Range (VAC) 380V±20%
Frequency Range 50Hz±10%
Rated Voltage (VDC) 220/110
Voltage Adjustment Range (VDC) 180-286
Rated Current (ADC) 0-10A
Output Current Limiting Range 5%-110%
Voltage Stabilization Accuracy ≤ 0.5%
Current Stabilization Accuracy ≤ 0.5%
Ripple Coefficient ≤ 0.1%
Conversion Efficiency (Full Load Output) ≥ 94%
Dynamic Response (Load 20%-30%) Recovery time ≤ 200μs, Overshoot ≤ ±2%
Dielectric Strength 2kVAC 1min
Noise (1m) ≤ 55dB
Operating Ambient Temperature -5℃ ~ +45℃
Transport & Storage Temperature -40℃ ~ +70℃
Humidity 0-90% non-condensing
Protection Functions Output overvoltage protection, output current limiting protection, output short-circuit protection, overtemperature protection, module parallel protection, overcurrent protection

1. Fully automatic step-down
Selects step-down switching based on the busbar voltage, using either stepless step-down devices or tapped step-down devices, for stable and reliable operation. The centralized monitoring function performs coordinated control or governs the operating parameters and status of each part of the DC power supply, while collecting each module's parameters and uploading them to the host computer, and executing commands issued down from the host computer. A modular building-block structure design is used, allowing monitoring of two-way incoming AC voltage and current, mutual backup switching for each module; coordinated control of shared/float-charge current and voltage parameters; battery voltage and current parameters; battery charge/discharge current parameters; system insulation monitoring; monitoring of combined switch status, control switches, and battery-fuse blown status; outgoing feeder loop monitoring (optional); battery patrol inspection (optional); ambient temperature and humidity monitoring.

2. Temperature compensation
Based on the parameters provided by the battery manufacturer, the battery temperature compensation center and temperature compensation coefficient are selected to automatically adjust the battery float-charge voltage, meeting the battery's charging requirements.

3. Communication functions
Selectable via the interface, supporting both CDT and MODBUS communication protocol conversion. It has RS-485 and RS-232 communication interfaces, facilitating remote control and achieving "four remotes" functionality.

4. Alarm reporting functions
Through parameter settings, supports multiple types of alarm reporting, including: busbar overvoltage/undervoltage, battery-group overvoltage/undervoltage, insulation abnormality, and output switch status.

5. Battery-free maintenance
Uses maintenance-free valve-regulated sealed lead-acid batteries, with reliable operation and no need to add water. The controller alone can carry out automatic constant-current charging according to preset priorities and float-charge switchover.

This device is equipped with automatic control circuits, high-current DC relays, and tapped step-down silicon chains, providing fast adjustment, stable operation, and convenient installation.
1. Step-down range: 0~45V (can be customized per customer requirements)
2. Step-down taps: 7 (or 5) taps; rated current: 10~200A
3. Automatic state: the device's automatic detection circuit continuously detects the output voltage of the tap chain (control busbar voltage); after signal attenuation, comparison, and signal conversion, it directly drives the high-current relay to switch each step-down silicon-chain tap on or off, thereby automatically regulating the output voltage to keep it stable.
4. Manual state: by manually switching the control high-current relay, the silicon chain taps are switched in or short-circuited, thereby changing the output voltage.

  • Suitable for building 38AH/220V and below systems.
  • Both the charging module and the step-down unit/monitor use hot-swappable technology, making installation and maintenance convenient.
  • The controller monitors the busbar voltage, controls the busbar voltage, and monitors battery charge/discharge current and module status.
  • Can be equipped with 4 x 220V natural-air-cooled charging modules; each with a rated current of 3A and inrush current of 30A/0.5S.
  • The step-down unit has automatic silicon-chain step-down functionality, with a maximum current of 3A.
  • The monitor uses an LCD display with a Chinese menu and supports button operation, enabling system parameter setting and system calibration.
  • The monitor uses an LCD display and has wired insulation monitoring capability, with unattended automated management functionality.
  • The monitor can connect to a battery patrol-inspection unit, completing voltage detection for up to 18 batteries.
  • The monitor detects busbar voltage, battery voltage, battery charge/discharge current, and module status.
  • Provides RS232/RS485 communication interfaces, with both CDT and MODBUS communication protocols selectable, enabling connection to the substation's automation system.
    11. Provides one AC phase input and one PT100 input; when powered by PT, the system automatically limits output power, with a limited output current of 2.0A.
About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China XBGZDW Intelligent high frequency DC screen Supplier and Custom XBGZDW Intelligent high frequency DC screen Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2