XBBBR-12 Intelligent reactive power compensation switching equipment Custom

Home / Products / High-Voltage Complete Switchgear / XBBBR-12 Intelligent reactive power compensation switching equipment
Wenzhou Xubian Electric Co., Ltd.
  • XBBBR-12 Intelligent reactive power compensation switching equipment
  • XBBBR-12 Intelligent reactive power compensation switching equipment

The controller offers continuously adjustable compensation capacity, with up to 78 levels of reactive-power adjustment paths, and features such as high reliability, maintenance-free operation, and low harmonic generation. It can be connected directly to the high-voltage grid, smoothly regulating the system's reactive power, raising the power factor, reducing transmission losses, and improving grid voltage stability. When used across a power grid, this controller can greatly improve the grid's reactive-power flow and voltage automatic-control capability, substantially increasing the grid's transmission capacity. It plays a safeguarding role for the safe, stable operation of the grid while also reducing investment costs — making it an ideal dynamic reactive-power compensation and voltage-regulation control device for high-voltage and extra-high-voltage grids.

  • Installation location: outdoor or indoor
  • Ambient temperature: -5°C ~ +40°C, -25°C ~ +40°C, -35°C ~ +40°C
  • Solar radiation intensity: 0.1 W/cm² (wind speed 0.5 m/s)
  • Altitude: 1000m, 2000m, 3000m, 3500m, 4000m, 4500m
  • Maximum annual wind speed: 35 m/s
  • Seismic intensity: Magnitude 8 (China 12-degree intensity scale)
  • Horizontal acceleration: 0.3g
  • Vertical acceleration: 0.15g
  • Relative humidity: ≤ 90%
  • Environmental pollution level: Level II, Level III, Level IV
  • Creepage distance: 2.5 cm/kV, 2.8 cm/kV, 3.1 cm/kV
  • Ice coating thickness: 10 mm (wind speed not exceeding 15 m/s)

By controlling the switching-in of reactors and capacitors to vary the amount, the device changes the inductive reactive power output; by switching reactors in/out, it compensates the capacitance to achieve the desired capacitive reactive-power output.

1. Rated capacity: 100~400 kvar
2. Rated voltage: 6, 10 kV
3. Rated frequency: 50Hz
4. Number of phases: 3-phase
5. Total loss ratio: 2.5%~1.2%
6. Temperature rise limit: winding average temperature rise ≤65K; top-oil temperature rise ≤55K
7. Cooling method: ONAN or ONAF
8. Insulation level: rated voltage 6kV: AC 35 / LI 60kV; rated voltage 10kV: AC 35 / LI 75kV
9. Noise level: ≤60dB, 65dB, 70dB, 78dB (or equivalent to a transformer of the same capacity)
10. Transformer oil: transformer oil No. 45 or No. 25

1. Capacitor switch-in conditions:
UL ≤ U ≤ UH (UL = line voltage lower limit setting, U = line voltage, UH = line voltage upper limit setting)
cosφ lagging
Q ≤ Qe (Qe = capacitor bank's set switch-in capacitance capacity, Qe = line reactive power)
Delay time t ≥ Td1 (Td1 = switch-in delay time)

2. Capacitor switch-out conditions:
UL0 ≥ U or U ≥ UH0 (UL0 = line voltage protection lower limit, U = line voltage, UH0 = line voltage protection upper limit)
cosφ leading
Qe ≥ Qf (Qf = line's allowable over-compensation capacity, Qe = line reactive power)
Delay time t ≥ Td1 (Td1 = switch-out delay time)

3. Reactor switch-in conditions:
UL ≤ U ≤ UH (UL = line voltage lower limit setting, U = line voltage, UH = line voltage upper limit setting)
cosφ leading
Q ≤ Qk (Q = reactor's set switch-in capacity, Qk = line reactive power)
Delay time t ≥ Td2 (Td2 = switch-in delay time)

4. Reactor switch-out conditions:
UL0 ≥ U or U ≥ UH0 (UL0 = line voltage protection lower limit, U = line voltage, UH0 = line voltage protection upper limit)
cosφ lagging
Qe ≥ Qf (Qk = line's allowable over-compensation capacity, Qe = line reactive power)
Delay time t ≥ Td2 (Td1 = switch-out delay time)

About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China XBBBR-12 Intelligent reactive power compensation switching equipment Supplier and Custom XBBBR-12 Intelligent reactive power compensation switching equipment Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2