XBGCK Low voltage draw out switchgear Custom

Home / Products / Low Voltage Complete Electrical Equipment / XBGCK Low voltage draw out switchgear
Wenzhou Xubian Electric Co., Ltd.
  • XBGCK Low voltage draw out switchgear
  • XBGCK Low voltage draw out switchgear
100022-qoye Model Designation
XB Enterprise code
G Enclosed switchgear cabinet
C Withdrawable type
K System
□ Main circuit scheme number
  • Rated insulation voltage: 660V/1000V
  • Rated operating voltage: 400V/660V
  • Rated operating voltage of auxiliary circuit: AC 380V, 220V; DC 110V, 220V
  • Rated busbar current: 1000A, 1250A, 1600A, 2000A, 2500A, 3200A, 4000A, 5000A
  • Rated short-time withstand current of busbar: 50kA, 80kA (RMS value) for 1 second
  • Rated peak withstand current of busbar: 105kA/0.1s, 140kA/0.1s, 176kA/0.1s
  • Rated current of branch busbar: 630A, 1000A, 1250A, 1600A
  • Rated short-time withstand current of branch busbar: 30kA, 50kA (RMS value) for 1 second
  • Rated peak withstand current of branch busbar: 63kA, 105kA/0.1s
  • Enclosure protection class: IP30, IP40
  • Busbar configuration: three-phase four-wire, three-phase five-wire
  • Operating method: local, remote, automatic
  • Ambient air temperature not exceeding +40°C and not below -5°C; average temperature within 24 hours not exceeding +35°C.
  • Relative humidity not exceeding 50% at maximum temperature of +40°C; higher relative humidity permitted at lower temperatures, up to 90% at +20°C.
  • Clean air, free from corrosive and explosive gases, and free from electrically conductive or insulation-damaging dust.
  • No location with significant sway or shock vibration; installed vertically, with tilt angle not exceeding 5 degrees.
  • Altitude not exceeding 2000 meters.
  • Suitable for transport and storage under the following conditions: -25°C to +55°C, with short-term (not exceeding 24 hours) up to +70°C.
  • If the user's requirements cannot meet the above conditions, this should be agreed upon with the manufacturer.

The basic cabinet frame of the XBGCK is an assembled structural design. All structural components of the cabinet frame are galvanized and plastic-sprayed, and connected via bolts to form the basic cabinet frame. Doors, panels, partitions, drawer units, installation brackets, and busbar/electrical component sets are added as needed to form a complete control center cabinet. The cabinet frame structure has the following features:

I. Cabinet Frame
The cabinet frame is made of C-shaped profile material. Cabinet frame components and dedicated matching parts are supplied by this company to ensure the precision and quality of the frame body. Equipment spacing follows a modular system (module E = 20 mm, same throughout).
1. Component molding dimensions and opening dimensions follow the modular system.
2. Internal structural components are galvanized.
3. The cabinet top cover is removable; the four corners of the cabinet top are equipped with lifting rings for hoisting and transport.
4. The cabinet is divided into three mutually isolated compartments: the busbar compartment, the functional unit compartment, and the cable compartment, to prevent accident propagation.

II. Functional Units (Drawer Section)
1. Drawer unit heights are modularized in increments of 200mm, divided into five size series: 1/2 unit, 1 unit, 1.5 unit, 2 unit, and 3 unit. The rated circuit current for these units is 630A and below.
2. Each MCC cabinet can accommodate a maximum of 9 one-unit drawers or 18 half-unit drawers.
3. The operating mechanism is mechanically linked with the drawer unit; the main switch cannot be withdrawn while in the closed position.
4. The operating mechanism of the drawer unit can be locked in the closed or open position with a padlock, allowing safe maintenance of electrical equipment.
5. The rear of the functional unit is equipped with main circuit outgoing plug contacts and auxiliary circuit secondary plug contacts.
6. The functional unit compartment partitions use metal sheet material.
7. The drawer unit uses a rotary push-in mechanism, featuring a three-position function, with simple and reliable operation.
8. The GCK drawer push-in mechanism uses a screw-track-guided component movement method, achieving push-in and withdrawal of the functional unit. During the push-in and withdrawal process of the functional unit, it achieves three-position display and mechanical interlocking, is equipped with a micro-switch, and allows electrical interlocking during the test position.

1. See the table below for external dimensions.
2. When installing, the GCK series switchgear cabinet should not be directly against the wall but should be installed vertically with the rear side facing the cable trench for the cabinet's outgoing cables, for ease of maintenance. The distance to the rear wall is typically 800- 1200 mm; see the diagram below for the front clearance distance.

100013-lHPn100004-wfPq Cabinet Width (D) Cabinet Depth (W) Cabinet Height (H)
600, 800, 1000 800, 1000 2200
About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China XBGCK Low voltage draw out switchgear Supplier and Custom XBGCK Low voltage draw out switchgear Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2