FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch Custom

Home / Products / Load Switch Series / FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch
Wenzhou Xubian Electric Co., Ltd.
  • FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch
  • FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch
100112 Model Designation
FL SF6 load switch
N Indoor
36 Design serial number
12 Rated voltage (kV
D With earthing switch
T Spring operating mechanism
630 Rated current (A)
20 Rated short-time withstand current (kA)
100103 Model Designation
FL SF6 load switch
R Combined with fuse
N Indoor
36 Design serial number
12 Rated voltage (kV)
D With earthing switch
T Spring operating mechanism
125 Rated current (of the fuse)
50 Prospective rated short-circuit breaking current (kA)
  • Ambient air temperature: -15°C to +40°C;
  • Altitude: not exceeding 1000m;
  •  Humidity conditions: daily average relative humidity not exceeding 95%, monthly average relative humidity not exceeding 90%;
      daily average water vapor pressure not exceeding 2.2kPa, monthly average water vapor pressure not exceeding 1.8kPa;
  • The surrounding air is not significantly polluted by dust, smoke, corrosive and flammable gases, vapor, or salt spray;
  • Vibration or earth tremors from outside the switchgear and controlgear are negligible;
  • The amplitude of electromagnetic interference induced in the secondary system does not exceed 1.6kV.
  •  Special service conditions
    According to the provisions of the national standard GB/T11022-1999 "Common Specifications for High-voltage Switchgear and Controlgear Standards", the circuit breaker shall operate under normal service conditions.
    If the user's working conditions differ from the normal service conditions, for example: the installation site is at an altitude exceeding 1000m, the ambient air temperature exceeds the limits specified in the normal service conditions, or the site is highly humid and prone to condensation, the user should consult with the manufacturer and reach an agreement.
No. Item Unit Data
FLN36-12D FLRN36-12D
1 Rated voltage kV 12 12
2 Rated frequency Hz 50 50
3 Rated current A 630 125
4 Rated short-time withstand current / rated short-circuit duration of load switch kA/S 20/3 -
Rated short-time withstand current / rated short-circuit duration of earthing switch kA/S 20/2 -
5 Rated peak withstand current and rated short-circuit making current kA 50 125 (prospective)
6 Rated breaking current Active-load breaking current A 630 -
Closed-loop breaking current A 630 -
5% rated active-load breaking current A 31.5 -
Cable-charging breaking current A 10 -
No-load transformer breaking capacity kVA 1250 1250
Transfer current breaking A - 1700
Prospective short-circuit breaking current kA - 50
7 Rated insulation level 1min power frequency withstand voltage, phase-to-phase, to earth / across the open contacts kV 42/48 42/48
Lightning impulse withstand voltage, phase-to-phase, to earth / across the open contacts kV 75/85 75/85
8 Mechanical life times 500 500
9 SF6 rated gas pressure (gauge pressure at 20°C) MPa 0.04~0.05 0.04~0.05

Model Rated Voltage (kV) Fuse Rated Current (A) Fuse-Link Rated Current (A) Rated Breaking Current (kA)
XRNT 12 40 6.3, 10, 16, 20, 25, 31.5, 40 50
XRNT 12 100 50, 63, 71, 80, 100 50
XRNT 12 125 125 50

FLN36-12 SF6 Enclosure
100094

100085-6qgJ

100076

FLN36-12 SF6 Load Switch
100067
FL(R)N36-12D Indoor AC High-voltage SF6 Load Switch
100058 100049
FLN□-24D Indoor AC High-voltage SF6 Load Switch
1000310 1000211
FL(R)N35-12D Indoor AC High-voltage SF6 Load Switch
1000112 1000013

About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch Supplier and Custom FLN36-12 Indoor AC high voltage sulfur hexafluoride load switch Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2