XBDWF-12 Outdoor AC cable tapping box Custom

Home / Products / Box-Type Substation / XBDWF-12 Outdoor AC cable tapping box
Wenzhou Xubian Electric Co., Ltd.
  • XBDWF-12 Outdoor AC cable tapping box
  • XBDWF-12 Outdoor AC cable tapping box
lnooyswt1792824132 Model Designation
XB Company code
DWF Cable branch box Company code
□ Voltage class
□ Number of circuits (total number of incoming and outgoing lines per phase)
□ "A" = with surge arrester; if omitted = without surge arrester
  • Ambient temperature: maximum +40°C, minimum –30°C
  • Wind speed: equivalent to 34 m/s (not exceeding 700 Pa)
  • Humidity: daily average relative humidity not exceeding 95%; monthly average relative humidity not exceeding 90%
  • Anti-seismic: horizontal acceleration not exceeding 0.4 m/s², vertical acceleration not exceeding 0.15 m/s²
  • Installation site inclination: not exceeding 3°
  • Installation environment: surrounding air must not be obviously polluted by corrosive, flammable gases or water vapor; no severe vibration at the installation site
  • If the above conditions are exceeded, please consult with our company before ordering
Item Parameter
Rated voltage 12 kV
Rated current 630 A
Dynamic stability current (peak withstand) 50 kA/0.3 s
Thermal stability current 20 kA/3 s
1-min power-frequency withstand voltage 42 kV
15-min DC withstand voltage 52 kV
Lightning impulse withstand voltage 105 kV
Enclosure protection degree IP33
zsbnjlkl1792824123 1 Upper side door
2 Bushing support bracket
3 Cable termination
4 Lower enclosure
5 Cable

The XBDWF-12 outdoor AC cable branch box is designed for outdoor use, with a fully sealed structure, fully insulated, dust-proof, moisture-proof, flood-resistant, corrosion-resistant, and strong environmental adaptability. The enclosure protection degree reaches IP33. The cable joint support bracket is made of stainless steel, and the enclosure is made of stainless steel plate or cold-rolled steel plate with spray coating.

The cable joint support bracket is installed in the upper part of the branch box to support the bushings, which are used to fix the cable joints. If a surge arrester is fitted, it is installed at the end of the cable joint. In addition, the short-circuit fault indicator and the voltage presence indicator are also installed inside the branch box. All live parts of the main circuit inside the box are insulated by pre-fabricated plug-in cable terminations. The cable partition is located in the lower part of the box, equipped with cable fixing clamps and grounding terminals. The box has a rational layout, small volume, compact structure, elegant appearance, simple installation, and is maintenance-free.

kykmowav1792824214pieazguj1792824215 Outdoor AC Cable Tap Box Foundation Diagram
Cable Tap Box / Cable Feeder Pillar
Embedded Channel Steel
Grounding Busbar / Earthing Bar
Concrete Pedestal Foundation
Cable Manhole Entrance $\Phi800$
Drainage Groove / Drainage Trench
Foundation Mounting Dimension Drawing
Foundation Diagram
Dimension Scheme 1 Scheme 2 Scheme 3 Scheme 4 Scheme 5 Scheme 6
A 510 770 815 990 1060 1130
B 295 330 415 540 480 705
About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China XBDWF-12 Outdoor AC cable tapping box Supplier and Custom XBDWF-12 Outdoor AC cable tapping box Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2