DFW American cable tap box Custom

Home / Products / Box-Type Substation / DFW American cable tap box
Wenzhou Xubian Electric Co., Ltd.
  • DFW American cable tap box
  • DFW American cable tap box
jljzyxud1792824333 Model Designation
DFW DFW: Cable Tap Box
□ Voltage Class
□ Number of Main Circuits
□ Number of Branch Circuits
□ Main Circuit Current Rating
□ Branch Circuit Current Rating (A)
  • Ambient Temperature: Maximum +40°C, Minimum −30°C
  • Wind Speed: Equivalent to 34 m/s (not exceeding 700 Pa)
  • Humidity: Average daily relative humidity not exceeding 95%; average monthly relative humidity not exceeding 95%
  • Seismic Resistance: Horizontal acceleration not exceeding 0.4 m/s², vertical acceleration not exceeding 0.15 m/s²
  • Installation Tilt: Not exceeding 30°
  • Installation Environment: The surrounding air must be free from corrosive gases, combustible gases, water vapor, and other significant contamination. The installation site must be free from severe vibration.

Note: Please consult our company if the product is to be used under conditions exceeding the above specifications.

Item 200A (Branch Network) 600A (Main Network)
Rated Voltage 15 kV 15/25 kV
Rated Current 200 A 600 A
Rated Short-Time Withstand Current 16 kA/1 s 40 kA/1 s
1-Minute Power-Frequency Withstand Voltage 42 kV 42 kV
15-Minute DC Withstand Voltage 53 kV 78 kV
Lightning Impulse Withstand Voltage 95 kV 125 kV
Minimum Electrical Breakdown Voltage 11 kV 19 kV

Where site conditions are limited and direct cable branching is not feasible, multiple cable branches can be formed by directly connecting the cables without the need for a busbar. The connection method is illustrated below. The assembly can be installed inside a cable well or at another suitable location.

Example: Four-Circuit Cable Outgoing Line (2×600A + 2×200A)

Each assembly consists of two T-II cable connectors, with each T-II connector comprising a plug-in elbow connector and a T-body connector. The 200A side connector is a T-II cable connector, while the other side is equipped with an insulating protective cap.

wblzmiaz1792824743 Description Specification
Overall horizontal dimension 900 mm
Left vertical dimension 224 mm
Right vertical dimension 318 mm
Left cable connection 35–185 mm²
Middle cable connections 50–500 mm²
Right cable connection 35–185 mm²

Example: Three-Circuit Cable Outgoing Line (3×600A)
Each assembly consists of three T-shaped cable connectors and two intermediate connection connectors. Dimensions are shown in the following diagram.

Cable Connection: 50–500 mm²
jogqokyg1792824544

Note: The cable branches can be expanded or reduced as required. The assembly can be installed in an outdoor enclosure or directly inside a cable well.

200A American-Style Cable Branch Connector
dvriybcq1792824873 MPD-15/200A — 200A Busbar
ZT-15/200 — T-Type Cable Connector
JYM-15/200 — 200A Insulating Cap
BLQ-17/50 — T-Type Surge Arrester

American-Style 600A
kypuwcso1792825035 Cable Branch Connector
Reserved Trench
Grounding Grid
Cable Connector Fixing Bracket
Concrete Foundation
Cable Well, Ø800
Drainage Trench
Foundation Plan
hklwqpey1792825056 Ground Installation Dimensions
4–12×30
Recommended Dimensions:
Busbar 2 Circuits 3 Circuits 4 Circuits
A 900 1200 1500
B 500 800 1100
American-Style 200A
ohldzfti1792825124 Cable Branch Connector
Reserved Trench
Grounding Grid
Cable Connector Fixing Bracket
Concrete Foundation
Cable Well, Ø800
Drainage Trench
Foundation Plan
pusrjggt1792825147 Ground Installation Dimensions
4–12×30
Recommended Dimensions:
Busbar 2 Circuits 3 Circuits 4 Circuits
A 900 1200 1500
B 500 800 1100
About Us

XUBIAN ELECTRIC POWER YOU CAN TRUST

Wenzhou Xubian Electric Co., Ltd.
  • 10+

    Years Experience

Wenzhou Xubian Electric Co., Ltd. is a technology-driven China DFW American cable tap box Supplier and Custom DFW American cable tap box Factory, specializing in the production, sales and after-sales maintenance of high- and low-voltage complete switchgear systems.

We have a dynamic and innovative team for R&D, design, management and marketing, backed by solid R&D and production competence.

Following our quality policy: “Survival through Quality, Development through Innovation, Continuous Improvement, Customer Satisfaction”, we enforce strict control over all production stages to ensure 100% qualified finished goods. Our workshop is well‑equipped with full‑range processing facilities, testing apparatus and advanced inspection solutions.

View More
Wenzhou Xubian Electric Co., Ltd.

Company Philosophy

Quality Centered, Quality First, Win-Win Cooperation

Company Mission

To become a trusted global manufacturing partner for power transmission and distribution equipment.
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Factory equipment
  • Warehouse
  • Warehouse
News Center

Keep Up To Date With Our Latest News.

View More

Certificate Of Honor

  • 1
  • 2